KingK← All projects

Parts Library

The parts I use in my cases, at their real sizes. Drag any part to spin it, and tap a link to see the real product.

Try these in the PC Builder →

Fans

Fan mounts

360mm fan mount

400 × 150 × 29 mm

Copied from my Shapr3D case. Bottom front.

240mm fan mount

281 × 142.5 × 29 mm

Copied from my Shapr3D case. Bottom back and the side arms.

120mm fan mount

143 × 142.5 × 29 mm

Copied from my Shapr3D case. Shown flat; in the case it sits angled.

Dust filters

120mm dust filter

120 × 120 mm

Fine mesh in a thin frame.

240mm dust filter

240 × 120 mm

Sized for a 240mm fan.

360mm dust filter

360 × 120 mm

Sized for a 360mm fan or radiator.

Cooling

Corsair Hydro X XR5 360 V2 radiator

398 × 120 × 30 mm

All-black coated radiator, two G1/4 ports, mounts three 120mm fans.

Barrow 360mm distro plate with DDC pump

360 × 120 × 57.2 mm

Black, clear acrylic body with an aluminium front panel and a built-in DDC pump. 11 G1/4 ports. Port and chamber layout are approximate.

GPU water block (Alphacool Eisblock Aurora, 7900 XT reference)

block 265.5 × 125.2 × 34.2 mm, backplate 100.7 × 6 mm

A close match to my 7800 XT block. Chrome copper base, acrylic top, black backplate, 4 G1/4 ports.

CPU water block (generic)

about 52 × 52 × 22 mm

A generic block. Real sizes vary by model.

Plumbing

Corsair Hydro X XT hardline tubing, satin

14 mm outer diameter

Shown as a 300 mm piece.

Dracaena G1/4 to 14mm compression fitting

22 mm wide × 17 mm tall

White fitting for 14mm hard tube.

Core components

XFX Radeon RX 7800 XT Quicksilver Magnetic Air

337 × 132 × 59 mm

White triple-fan card. Shown with its air cooler, not the water block.

Lian Li Edge Gold 1000W (white)

182 × 86 × 150 mm

L-shaped PSU for dual-chamber cases. Overall box is exact; L thickness is approximate.

ASUS ROG Strix B650-A Gaming WiFi

ATX: 305 × 244 mm

AM5 board. Layout is simplified.

AM5 CPU

40 × 40 mm

The processor with its metal heat spreader. Generic.

Corsair Vengeance RGB DDR5 32GB (2×16GB), white

135 × 8 × 44 mm

One stick of the kit.

Samsung 990 PRO 2TB

80 × 22 × 2.3 mm

M.2 2280 drive, no heatsink.

Coming next: the Corsair XF ball valve. Fan mounts are exact copies from my Shapr3D model, assuming one model unit is 1 mm. Everything else uses the maker's listed size.